A polisher being worked along the window line of a silver car at EXD in Hyde Park.

EXD_ Care Guides · Aftercare

Paint Correction and Detailing: your aftercare

Avi Nair, EXD · About 4 minutes · Updated 27 October 2026

Paint correction levels a fine layer of clear coat to remove swirls and defects. We measure paint depth before we polish, and we remove only what the paint allows. Clear coat does not grow back, so the way you wash from today decides how long this finish lasts. Levels 1 to 4 add no lasting protection. Level 5 includes the Labocosmetica BLINDO PLUS + HPC PRO ceramic coating.

The first days

  • Levels 1 to 4: the paint is ready for a wash at any time. Make the first one a hand wash, using the method below.
  • Level 5: no shampoo wash for 7 to 10 days while the coating cures. Please follow the ceramic coating guide.
  • A trace of polish dust sometimes appears in a seam or badge after the first drive. Wipe it with a damp microfibre.
  • Do not dry wipe dust off the paint. Fresh, corrected paint shows every wiping mark.
The wet wheel and gloss black wing of a Mercedes-AMG GLC 43 at EXD in Hyde Park.
A freshly washed wheel and wing in the EXD Hyde Park studio.

Routine washing

  • Hand wash every two weeks, and sooner after gravel roads or rain.
  • Rinse first, or use a pre-wash foam, to lift grit before the mitt touches the paint.
  • Wheels first, with their own bucket, brush and mitt.
  • Two buckets with grit guards, a pH-neutral shampoo, a soft microfibre mitt. Straight lines, light pressure, then the paint from the roof down.
  • Dry with a plush microfibre towel or an air blower. Never leave water to dry on the paint.
  • Cabin: vacuum, then a pH-neutral interior cleaner on a microfibre. Clean leather before you condition it.
  • We supply XPEL, GYEON or Labocosmetica home-care products for paint and cabin, whichever you prefer.

What to avoid

  • Shared sponges, dirty buckets and dirty towels. They are the main cause of the swirls we removed.
  • Automatic and brush car washes. A corner hand wash is fine. Ask for a clean mitt, no brushes on the paint, and no harsh degreaser on film.
  • Dry wiping, feather dusters and quick detailers on dusty paint.
  • Household detergents and dishwashing liquid. They strip protection and dry out trim.
  • Washing in direct sun or on a hot panel.
  • A car cover on a dirty car.

What is normal

  • Some deeper marks were refined rather than removed, where removal would have cost too much clear coat. We point these out at handover.
  • Fine wash marks building over months, even with good care. A light polish at a maintenance visit restores the finish.
  • Uncoated paint losing its water beading. Paint without protection does not bead for long.

When to contact the studio

  • New marks appearing after your first wash.
  • A stain, etch or water spot a normal wash does not remove.
  • Any question about a product before you use it.

Send a daylight photo by WhatsApp to +27 81 063 8786, or email bookings@exdetails.co.za.

The correction is only as good as the wash that follows it.

Maintenance visits

  • Valet Wash: a presentation wash between deeper services.
  • Maintenance Wash at the studio at least every three weeks. This is our recommendation, to protect the corrected finish from wash marks and road film.
  • Full decontamination at the studio every three months: iron remover and clay, without polishing. On a Level 5 car, the coating-safe method in the ceramic guide applies. Don't clay film at home, and don't use alcohol or solvents on it. If a film panel needs a deeper clean, we do that at the studio as part of a professional decon.
  • If you would like the finish to hold for longer, XPEL film and ceramic coating are both options. We explain both at your next visit, and you decide.

Warranty

  • Paint correction and detailing carry no manufacturer warranty. The Level 5 coating carries the manufacturer's warranty terms, which we hand over in writing at collection.
  • EXD workmanship: a 12-month EXD workmanship promise on every Prepare level and the Deep Interior Detail.
  • Registration: where a product carries a manufacturer warranty, we register it on your behalf, and you receive your warranty details from the studio.
  • Claims: contact us directly. We handle it from start to finish.

Executive Details, 386 Jan Smuts Avenue, Hyde Park, Johannesburg www.exdetails.co.za | bookings@exdetails.co.za | +27 81 063 8786

Photos: before/after correction pair and Rupes polisher, shot_list.md unless found in "Exterior machine close ups".

WhatsApp EXD on +27 81 063 8786. Aftercare questions: bookings@exdetails.co.za. 386 Jan Smuts Avenue, Hyde Park, Johannesburg.