EXD_ Care Guides · Buying and protection
What to check before you buy paint protection film
Film is only as good as the brand behind it, the hands that fit it and the care after it. Ask who makes the film, how the patterns are cut, how edges are finished, and who you call if something lifts years later. Here's what I'd ask any installer, including us, before you buy.
Avi Nair, EXD · About 7 minutes · Published 7 July 2026
A client once told me he chose his last film because the quote was quick and the brochure was shiny. Fair enough. Neither of those tells you what the film will look like in year six, or who answers the phone when an edge lifts.
Here's the list I'd use if I were buying film for my own car.
Ask what you're actually getting, on this car, not a brochure pack.
1. The brand
Ask two questions.
How long has the brand been around, and is that long enough to stand behind its warranty? A ten-year warranty is a promise about the next decade. It helps if the company has a track record longer than that. As an example, XPEL was founded in San Antonio, Texas in 1997, began selling its own paint protection film in 2007, and launched its self-healing ULTIMATE film in 2011.
Who handles warranty claims in South Africa? A warranty from a company with no local presence is hard to use. Ask who the local distributor is and how a claim reaches them. For XPEL, Custom Protection Products is the exclusive distributor, supply and training agent in Southern Africa, and XPEL South Africa publishes a directory of accredited dealers so you can check an installer before you commit.
2. The film warranty
Read the warranty, not the summary.
- What it covers. XPEL's limited warranty on ULTIMATE PLUS and STEALTH runs ten years from the date of installation and covers defects such as yellowing, cracking, blistering and delaminating. It applies only to professionally installed film.
- What it doesn't. Film warranties cover the film, not road damage. XPEL South Africa lists exclusions such as incorrect installation, installation by a non-certified technician, careless use of a high-pressure hose, incorrect wash methods and non-approved ceramic coatings.
- Whose name is on it. Ask who registers it and when. In South Africa, XPEL warranty registration is done through the dealer who fitted the film. You should leave with the warranty details in your name.
- Does it transfer. XPEL's warranty transfers to a new owner with proof of the original installation date, for the rest of the original period. Useful when you sell.
3. The installer
The same roll of film can look very different on two cars. The difference is the installer.
- Certified by the brand. Ask for it, then check it on the brand's own dealer list.
- Their own workmanship promise. The film maker covers the film. The installer should stand behind the fit. Ask how long, and what it covers.
- Wrapped or cut edges. A wrapped edge folds around the panel, so you don't see a line and dirt has less to grab. Not every panel allows it. Ask where edges will sit before the work starts.
- Cutting on the car, or pre-cut. Pre-cut patterns are plotted from vehicle data, so there's no blade near your paint. XPEL has built its pattern library since 1997. Where a panel is cut by hand on the car, ask how the paint is protected. A blade on clear coat leaves a line that film won't hide.
- Paint prep first. Film seals in whatever is underneath. Ask what happens before the film goes on: a wash, decontamination, and correction if the paint needs it. Swirls under film stay under film.
- The bay. Dust is the enemy of a clean install. Ask to see where the car will be fitted. You want a clean, closed, well-lit bay, not an open driveway.
- Their own work. Ask for photos of cars they fitted, close up on edges and corners. Better still, see one in person.
4. Aftercare
A good install comes with a plan for the weeks after it.
- A first-wash rule. Ask how long the car should stay unwashed, and whether the first wash is theirs. At EXD, no wash in the first week. Between day 4 and day 7 the car comes back for its final check and seal, with a complimentary wash.
- A check-up. Film moves a little with heat and cold while it settles. A good installer checks the edges after that and trims or rechecks where needed.
- Coating on film. If you want a coating on the film, ask which one. XPEL South Africa endorses only XPEL FUSION PLUS on XPEL film, and a non-approved coating can void the film warranty.
- Who handles a claim. You want one name to call, not a chain.
When film takes the paint with it
Most film comes off clean. Sound factory paint, quality film, careful removal: that's the usual story. It's worth knowing when it isn't.
Adhesive ages. Heat and UV change an adhesive over the years. Industry guidance from film makers says long exposure to heat, sun and humidity can make applied film more brittle and increase how hard it grips. Low-grade or unbranded film with an unknown adhesive gives you no record of how it ages. On a Highveld bonnet that sits in the sun every day, that matters.
Old film fails in ways you can see. Yellowing, cracking, haze and spreading edge lift are signs film is near the end of its life. Film that turns brittle tends to tear rather than peel, which makes removal slower.
The paint underneath decides a lot. Removal puts stress on the joint between film, adhesive and paint. On sound factory paint that joint is strong. On a respray, ageing clear coat or a poorly bonded repair, the film's grip can be stronger than the paint's grip on the panel. XPEL South Africa notes a high risk of lifting paint on resprayed areas and on paint that was cut during trimming. See our guide to resprays for how to spot one.
Blade cuts. A cut made on the car can score the clear coat. Remove the film later and the line is still in the paint.
None of this means film is a gamble. It means the brand, the installer and the paint check matter more than the quote. What to look for:
- A known brand, with a long record and a warranty that covers yellowing, cracking, blistering and delamination.
- A local distributor that handles claims.
- A certified installer who measures the paint first and tells you which panels are repaired.
- Pre-cut patterns or careful edge work, with no blade on bare paint.
How we do it at EXD
Since you're reading this on our site, here's our side of the checklist. We fit XPEL film. We take paint-depth readings on every panel before film goes on and correct what needs correcting first. Edges are wrapped wherever the panel allows. A full front usually takes two to three days at the studio and a full car four to five. Don't wash the car in the first week. Between day 4 and day 7 it comes back for its final check and seal, with a complimentary wash, when edges are rechecked and trimmed if needed. We register your XPEL warranty and handle any claim with XPEL from start to finish, and our installation carries our own 12-month workmanship promise. If you'd like us to look at your car, WhatsApp +27 81 063 8786.
Questions to ask any installer (phone card)
- Which film, exactly?
- How long has the brand been around?
- Who is the SA distributor? Who handles claims?
- Are you certified by the brand? Can I check?
- What does the film warranty cover?
- Is it registered in my name? Does it transfer?
- What's your own workmanship promise, and for how long?
- Which edges are wrapped? Where will edges sit?
- Pre-cut or cut on the car?
- What prep happens first? Decon? Correction?
- Can I see the bay?
- Can I see photos of your edges?
- When is the first wash? Is there a check-up?
- Which coating goes on the film?
- If something goes wrong, who do I call?
WhatsApp EXD on +27 81 063 8786. 386 Jan Smuts Avenue, Hyde Park, Johannesburg.
.png)