EXD_ Care Guides · Aftercare
XPEL Film with FUSION PLUS Coating: your aftercare
Avi Nair, EXD · About 5 minutes · Updated 9 September 2026
Your XPEL film carries a layer of XPEL's own ceramic coating. Gloss film is sealed with XPEL FUSION PLUS PREMIUM v2. STEALTH satin film is sealed with XPEL FUSION PLUS SATIN, made for satin finishes, so the sheen stays even. We use FUSION PLUS on film for one reason: XPEL endorses only its own coating on XPEL film, and the film warranty excludes damage from other brands. The coating adds gloss and water repellence. The film still does the work against stone chips.
First days
- The coating needs at least 6 hours before it meets water, and we keep the car at the studio for this.
- Don't wash the car in the first week. No wash, no rinse, and where you have the choice, no rain.
- If water or a bird dropping lands on the car, lift it gently with a clean, damp microfibre. No rubbing.
- Between day 4 and day 7, the car returns to the studio for its final check and seal, with a complimentary wash.
Routine washing
- Wash every week with XPEL Rinse Free Car Wash, or a two-bucket hand wash with a pH-neutral shampoo free of wax.
- Work in the shade. Wheels first, with their own tools. Then work from the roof down on the paint and film.
- Dry every panel completely with a clean microfibre towel or an air blower. Never leave tap water to dry on the coating.
- XPEL Detail Spray lifts fingerprints between washes. XPEL Ceramic Boost adds slickness when you want it. Use both out of direct sun.
- Lift bugs and bird droppings the same day with XPEL Detail Spray or a pH-neutral quick detailer, and a soft microfibre. Don't use XPEL Film Cleaner on FUSION PLUS. XPEL South Africa says it is not for ceramic-infused film.
- Pressure washer: at least 1 metre from the film, a wide 40-degree tip, square to the panel, never at an edge or seam.
What to avoid
- Shared sponges, dirty buckets and dry wipes.
- Automatic and brush car washes. A corner hand wash is fine. Ask for a clean mitt, no brushes on the paint, and no harsh degreaser on the film.
- Wash-and-wax shampoos. Wax clogs the coating and dulls its water behaviour.
- Polish, cutting compound or aggressive cleaners on the coating.
- Any other coating or sealant on the film, including the GYEON and Labocosmetica coatings we use on bare paint. On XPEL film, only FUSION PLUS.
- Wax, solvents and petroleum degreasers on the film.
Maintenance visits
- Seven-day final check and seal, with a complimentary wash.
- Six-month condition check, complimentary: a full inspection of the vehicle at the studio.
- Maintenance Wash at the studio at least every three weeks.
- Full decontamination at the studio every three months. Don't clay film at home, and don't use alcohol or solvents on it. If it needs a deeper clean, we do that at the studio as part of a professional decon.
- Annual FUSION PLUS inspection: XPEL requires a yearly inspection by a certified FUSION PLUS installer, within 30 days either side of the installation anniversary. It covers a wash, decontamination and an inspection, and on PREMIUM v2 a single layer of XPEL FUSION PLUS LITE. Missing it voids the coating warranty, on PREMIUM v2 and SATIN alike. Keep proof of each visit with your warranty details.
Warranty
Film (from the date of installation): XPEL XTREME 5 years, EXO ARMOR 7 years, ULTIMATE PLUS 10 years, STEALTH 10 years, ULTIMATE FUSION 10 years. Covers yellowing, cracking, blistering and delamination. XPEL repairs or replaces the defective film, parts and labour.
On FUSION PLUS, use a detail spray or a pH-neutral quick detailer. Not Film Cleaner.
| Coating | XPEL warranty |
|---|---|
| XPEL FUSION PLUS PREMIUM v2 (gloss film) | The manufacturer's warranty terms, which we hand over in writing at collection. |
| XPEL FUSION PLUS SATIN (STEALTH) | The manufacturer's warranty terms, which we hand over in writing at collection. |
- Both cover the coated finish against oxidation, loss of gloss, UV damage and colour fading. XPEL replaces the coating or refunds its cost, up to the cost of the application or US$1,000, whichever is lower.
- Both require the annual inspection above.
- Not covered: stone chips, scratches, stains, water spots, incorrect wash methods, harsh chemicals, collision and hail, and areas not re-coated after a repair.
- Film and coating warranties transfer to a new owner for the remaining period, with proof of the original installation date.
- Registration: we register both warranties on your behalf, and you receive your warranty details from the studio.
- EXD workmanship: a 12-month EXD workmanship promise on the installation and the coating.
- Claims: contact us directly. We handle your claim with XPEL from start to finish.
Send a daylight photo by WhatsApp to +27 81 063 8786, or email bookings@exdetails.co.za.
Executive Details, 386 Jan Smuts Avenue, Hyde Park, Johannesburg www.exdetails.co.za | bookings@exdetails.co.za | +27 81 063 8786
Photos: water beading on coated film, shot_list.md.
WhatsApp EXD on +27 81 063 8786. Aftercare questions: bookings@exdetails.co.za. 386 Jan Smuts Avenue, Hyde Park, Johannesburg.
.png)