Foam being worked across the tailgate of a black Porsche in the EXD wash bay in Hyde Park.

EXD_ Care Guides · Wash and care

Feel your paint: the plastic bag test

Paint can look clean and still feel like fine sandpaper. Wash and dry first, slip a thin sandwich bag over your fingertips, and glide in a straight line over the bonnet, roof, lower doors and the panels behind the wheels. Smooth like glass is good. Grit means it needs a proper decontamination.

Avi Nair, EXD · About 4 minutes · Published 17 June 2026

This is my favourite two-minute test, because it costs nothing and surprises almost everyone. Owners run a bagged hand over a bonnet they washed that morning and pull a face. "That's my car?"

It is. Washing moves loose dirt. It doesn't move what's bonded to the paint.

If the bag snags, the paint isn't clean. Don't wash it yet.

What you need

  • A clean car, washed and dried. This matters. More on that below.
  • A thin, clean plastic sandwich or ziplock bag.
  • Good light and two minutes.

The EXD Bag Test

  1. Wash and dry first. Never do this on a dusty car. Rubbing a hand over dirt is how you put swirls in, bag or no bag.
  2. Slip the bag over your fingertips.
  3. Glide, don't press. Let the weight of your hand do it. Move slowly in a straight line.
  4. Test a few places. The bonnet, the roof, the lower doors and the panels behind the wheels. The low panels behind the wheels usually tell the loudest story.
  5. Judge it. Smooth like glass, slightly gritty, or rough.

Why the bag works

Bare fingertips are soft and slightly textured, so they blur small bumps. A thin layer of plastic changes how your fingers read the surface and makes tiny particles stand out. The paint didn't get rougher. Your sense of touch got sharper.

What the grit is

Bonded contamination. Tiny bits that have stuck to the clear coat and stay put through a normal wash:

  • Iron particles from brake dust, and rail dust.
  • Industrial fallout.
  • Tar spots, mostly low on the car.
  • Paint overspray from someone else's project.
  • A fine mist of tree sap.

It matters because it dulls the gloss, gives protection less to hold on to, and grit left on the paint gets dragged by every wash after.

What to do next

Smooth. Nothing to do. Keep washing the way you are.

Slightly gritty, on unprotected paint. Start with chemistry, then touch. An iron remover dissolves iron particles, often turning purple as it works. A tar remover deals with tar. Then, if it's still gritty, a clay bar or clay mitt with plenty of lubricant, light pressure and straight lines. Work small sections. Fold or rinse the clay often. If you drop a clay bar, bin it. Clay does not remove swirls, and careless claying can mar paint, so go gently.

Rough, or you'd rather not. That's a full decontamination, and a good moment to have the paint looked at under proper light.

If your car has PPF or a coating

PPF. Don't clay film at home, and don't use alcohol or solvents on it. If film panels feel gritty, bring the car in. We can decontaminate film at the studio as part of a professional decon.

Ceramic coating. Go chemical first. GYEON's guidance for coated cars is an iron remover and a tar remover after a proper wash, then a coating topper. Its tar remover notes that this reduces the need for claying in most cases. Clay on a coating risks marring it, and polishing out marring can take coating off with it. If a coated car still feels rough after chemical decontamination, leave it to the studio.

Rough paint after a careful wash is the one thing I'd like to feel for myself. WhatsApp +27 81 063 8786 to arrange an inspection at the Hyde Park studio.

What we use at EXD (optional note)

On paint and coatings, GYEON Q²M Iron and Q²M Tar, or Labocosmetica SIDERO, which removes iron and mineral deposits in one step. On film, leave the deeper clean to the studio. Any reputable iron remover and tar remover made for car paint follows the same method on paint.

Try it

WhatsApp EXD on +27 81 063 8786. 386 Jan Smuts Avenue, Hyde Park, Johannesburg.